Skip to content
Prep, Repair and Moisture

Spall and Patch Repair

Chipped joints, broken edges, holes and old patch scars are repaired with fast, hard patch materials, then ground flush, so the slab is sound before polishing, overlaying or coating.

Spall and Patch Repair by Intelli-Clean
  • WorkCut back, clean, bond and patch
  • MaterialsFast-setting, high-strength patches
  • FinishGround flush to the slab
  • ResultSound, level repairs
What you get

What is included

  1. 1Fast-setting repairsRapid patch materials harden quickly so the floor is back in service soon.
  2. 2Strong bondEdges are cut back and primed so the patch grips the old concrete.
  3. 3Ground flushRepairs are ground level with the slab so they do not catch wheels.
  4. 4Color matched when possibleFor polished floors we choose materials that blend and tell you where a patch may still show.
How it works

From your first call to the finished floor

We work out of Tampa and across Florida. Find your city below and set up a visit.

  1. 1You reach outCall, text or send the form with the building, the floor size, what is on the slab now and what has to go on it next.
  2. 2We survey the slabWe check coatings, cracks, joints, levels and moisture, so the repair plan is built on facts and not guesses.
  3. 3We prepare the surfaceGrinding, blasting, patching or testing is done with dust control, so the space stays clean around the work.
  4. 4We report and hand offYou get a plain summary of what we found and did, and the slab is ready for the next trade or the next coating.
Good fit when

Is this the right choice for your building?

  • Spalled joints and broken edges
  • Holes from removed equipment or anchors
  • Floors with old patchwork
  • Slabs prepared for overlay or coating
Good to know

What makes a floor ready for what is next

  • Facts before fixesMoisture, levels and coatings are measured, so the repair plan is built on facts.
  • Dust under controlShrouded machines and extractors keep the air clean around the work.
  • A clear handoffYou get a plain summary of what we found and did, ready for the next trade.
Questions

Common questions

Can patches be hidden under a polish?

They can often be minimized, but patch material can polish differently from the slab. When a flawless look matters, an overlay is the cleaner choice, and we explain both.

How long before a patch is usable?

Fast-set materials can be walked on in a short time and rolled over soon after. We confirm the product's time before we start.

Where we work

Find your city

Type your city or neighborhood to open the page for help near you. Tampa is home base and we serve all of Florida.

Start typing, for example a city name or a neighborhood.

    Ready for a floor that shines?

    Call or text Intelli-Clean in Tampa, or send the form, and we will set up a visit. Tell us about the building and the floor you have now.

    Visit

    Let's get your floor shining.

    Tell us about the building and the floor you have now. We read every message and reply with clear next steps and a time to walk the slab with you.

    • Your building: what it is used for, how big the floor is and what is on it now
    • Your city, the finish you have in mind, and any plan you saved from a tool on this site
    • A visit where we test the slab, polish a small patch and begin a plan around your hours
    Prefer to talk? Call or text(813) 516-3422

    Your estimate request

    Prefer to type? Text your request. We only use your details to respond to your request.