The Finish Library
Sixteen real finishes: how much stone shows, how glossy it gets and the colors and coatings that go on top, each with where it works and a link to the service that makes it.

How much stone shows, and how glossy it gets
The depth of the grind decides how much aggregate shows, and the last grit steps decide the sheen. Pick a look for each room or zone.
Cream FinishA light grind that keeps a smooth, clean cream surface with no stone showing.Best for: Offices and retailConcrete Polishing
Salt and PepperA shallow grind that shows fine flecks of sand and stone.Best for: Showrooms and lobbiesAggregate Exposure Finishes
Medium AggregateA deeper grind that reveals a mix of small and medium stones.Best for: Restaurants and hotelsAggregate Exposure Finishes
Full AggregateThe deepest grind, with large stones set in the polished paste.Best for: Bold lobbies and galleriesAggregate Exposure Finishes
Matte SheenA honed, low-reflection finish that hides traffic marks.Best for: Back rooms and busy aislesConcrete Polishing
Satin SheenA soft glow with fuzzy reflections of bright lights.Best for: Offices and storesConcrete Polishing
High GlossClear reflections of windows and fixtures.Best for: Showrooms and dining roomsRetail and Showroom Floors
Mirror GlossGlass-like clarity with sharp, deep reflections.Best for: Lobbies and dealershipsAuto Dealership Floors
Stains, dyes, overlays and epoxy
Color goes into the concrete or onto it. Each look below shows a real sample and the service behind it.
Amber StainWarm, mottled browns and golds that look like aged leather.Best for: Cafes and restaurantsAcid Staining
Cobalt DyeA deep, even blue that reflects like water.Best for: Brand lobbies and barsConcrete Dyeing
Jet Black DyeA dark, glossy surface like polished stone.Best for: Showrooms and loungesConcrete Dyeing
Marbled StainCloudy tans and greens that swirl like natural stone.Best for: Boutiques and homesConcrete Staining
Terrazzo StyleColored stone and glass seeded in a polished overlay.Best for: Lobbies and retailTerrazzo-Style Overlays
Saw-Cut GridCrisp cut lines that give a big floor a tile pattern.Best for: Large showroomsDecorative Saw Cuts and Scoring
Metallic EpoxyPearlescent swirls that move like liquid metal.Best for: Bars and boutiquesMetallic Epoxy Floors
Flake EpoxyA speckled, grippy surface that hides dirt and wear.Best for: Garages and shopsFlake Epoxy Floors
How glossy do you want to go?
Slide from matte to mirror on a real room and see how the reflections change.
Gloss units are a typical reading at a sixty degree angle. Ranges are approximate: matte about 5 to 15, satin 15 to 35, semi-gloss 35 to 60, high gloss 60 to 80 and mirror above 80.
Saved. Your choices will travel with the estimate form at the bottom of the page.
About the finishes
Are the pictures exact?
No. Concrete, stone and color vary from slab to slab, and screens change color. We polish or color a test area on your own floor so you can see the real result.
Can different rooms have different finishes?
Yes. A mirror in the showroom, a satin in the offices and a tough coating in the back rooms is a common plan.
Which finish is easiest to maintain?
Satin and semi-gloss hide traffic marks best. Higher gloss shows scuffs sooner, so it asks a little more from your cleaning routine.
Not sure which finish fits?
Call or text and tell us about the building. We will show you samples and polish a test patch on your own slab.




