Skip to content
The process

The Concrete Polishing Process

From the first grind to the final gloss reading: the steps, the tools and what to expect at each one.

A ride-on planetary concrete grinder with a dust shroud cutting a huge empty warehouse floor
Scroll the grit ladder

From a rough slab to a mirror in seven steps

The same showroom floor climbs through every grit while a microscope shows the scratches getting finer.

Step 1 of 7

30 to 70 Coarse grind

Metal-bond diamonds cut the slab flat and strip glue, paint and old coatings. The surface is rough and dull, and that is exactly right.

Typical particle size about 400 micronsGloss about 6 GU

Concrete Grinding
Step 2 of 7

100 to 200 Refine

Transition diamonds remove the scratches left by the coarse step and start to even out the surface.

Typical particle size about 100 micronsGloss about 12 GU

Concrete Grinding
Step 3 of 7

Densify Harden the slab

A densifier soaks in and reacts inside the concrete, filling pores and hardening the surface from within. This is what makes a polished floor tough.

Typical particle size pores filledGloss about 16 GU

Concrete Densifiers and Hardeners
Step 4 of 7

400 to 800 Hone

Resin diamonds smooth the surface to a satin sheen. Reflections appear, soft and fuzzy at first.

Typical particle size about 25 micronsGloss about 34 GU

Concrete Polishing
Step 5 of 7

1500 Polish

A finer resin step brings up depth. Ceiling lights now show as clear shapes in the floor.

Typical particle size about 10 micronsGloss about 62 GU

Concrete Polishing
Step 6 of 7

3000 Mirror

The finest step gives a glass-like gloss. Fixtures, windows and people reflect with sharp edges.

Typical particle size about 5 micronsGloss about 88 GU

Retail and Showroom Floors
Step 7 of 7

Guard Protect and burnish

A stain guard is applied and burnished in with a high-speed machine. The sheen is locked in and the floor sheds spills.

Typical particle size sealed and burnishedGloss about 94 GU

Concrete Sealers and Stain Guards

Keep scrolling to climb the grit ladder

The work

Six parts of every polish

  1. 1A ride-on planetary concrete grinder with a dust shroud cutting a huge empty warehouse floor
    Step 1

    Grind

    A ride-on planetary grinder levels the slab and strips what is on it, the foundation of every polish.

  2. 2An edge grinder with a diamond cup wheel working along a wall with a vacuum hose
    Step 2

    Edges and details

    Edge grinders reach along walls, columns and corners so the whole floor matches.

  3. 3A worker in a respirator pushing a walk-behind grinder with a large dust extractor beside it
    Step 3

    Dust control

    Machines run with shrouds and HEPA-grade extractors that capture the dust where it is made.

  4. 4A close-up of metal-bond diamond segments on a grinding disc against raw concrete
    Step 4

    Diamond tooling

    Metal and resin diamonds work up through the grits, each step erasing the last one's scratches.

  5. 5A high-speed burnisher polishing a large mirror-gloss warehouse floor
    Step 5

    Burnish and guard

    A high-speed burnisher works the guard in and brings up the final shine.

  6. 6A gloss meter resting on a mirror-polished concrete floor
    Step 6

    Measure the gloss

    A gloss meter checks the finish, so you get a number and not just a look.

What to expect

Before, during and after

  • Before the callNote the building type, the floor size and any coatings, stains or cracks you can see. A photo of the worst spot helps.
  • At the visitWe walk the slab, test hardness and moisture, polish a small patch and talk through the options in plain words.
  • During the workWe grind, repair, densify and polish in phases, with dust control and clear barriers around the work.
  • When we finishWe walk the floor with you in good light, explain the care routine and fix anything that needs a second pass.
Questions

About the process

How soon can someone get back to me?

Call or text (813) 516-3422 and we will tell you the earliest time we have.

Do I need to be there?

Not always. We need access to the building and power, and we like to walk the finished floor with you, in person or by photos.

Will the plan change after I say yes?

Plans are discussed in detail first. If we find something hidden, such as moisture or old glue, we tell you first and explain the options.

Ready for a floor that shines?

Call or text Intelli-Clean in Tampa, or send the form, and we will set up a visit. Tell us about the building and the floor you have now.

Visit

Let's get your floor shining.

Tell us about the building and the floor you have now. We read every message and reply with clear next steps and a time to walk the slab with you.

  • Your building: what it is used for, how big the floor is and what is on it now
  • Your city, the finish you have in mind, and any plan you saved from a tool on this site
  • A visit where we test the slab, polish a small patch and begin a plan around your hours
Prefer to talk? Call or text(813) 516-3422

Your estimate request

Prefer to type? Text your request. We only use your details to respond to your request.