Skip to content
Prep, Repair and Moisture

Concrete Densifiers and Hardeners

A liquid densifier soaks into the slab and reacts to fill pores and harden the surface. It is a key step in polishing, and on its own it reduces dusting and improves abrasion resistance on warehouses and shops.

Concrete Densifiers and Hardeners by Intelli-Clean
  • WorkClean, apply, work in and cure
  • TypesLithium, sodium or potassium silicates
  • ResultA harder, denser, less dusty slab
  • UsedUnder a polish or on its own
What you get

What is included

  1. 1Hardens from withinThe product reacts inside the concrete, so the benefit is not a film on top.
  2. 2Less dustA densified surface stops shedding the powder that raw concrete sheds.
  3. 3Better abrasion resistanceWheels and foot traffic wear a hardened surface much more slowly.
  4. 4Part of every polishDensifying is built into our polishing steps, and can also be a stand-alone service.
How it works

From your first call to the finished floor

We work out of Tampa and across Florida. Find your city below and set up a visit.

  1. 1You reach outCall, text or send the form with the building, the floor size, what is on the slab now and what has to go on it next.
  2. 2We survey the slabWe check coatings, cracks, joints, levels and moisture, so the repair plan is built on facts and not guesses.
  3. 3We prepare the surfaceGrinding, blasting, patching or testing is done with dust control, so the space stays clean around the work.
  4. 4We report and hand offYou get a plain summary of what we found and did, and the slab is ready for the next trade or the next coating.
Good fit when

Is this the right choice for your building?

  • Dusty, soft or worn raw slabs
  • Warehouses and shops on a budget
  • Floors that will be polished or guarded
  • Slabs with a powdery surface
Good to know

What makes a floor ready for what is next

  • Facts before fixesMoisture, levels and coatings are measured, so the repair plan is built on facts.
  • Dust under controlShrouded machines and extractors keep the air clean around the work.
  • A clear handoffYou get a plain summary of what we found and did, ready for the next trade.
Questions

Common questions

Does a densifier change the look?

It darkens slightly and adds a little sheen. For a higher gloss it is the first step before polishing.

How long does it last?

It is a chemical reaction in the slab, so the hardening is permanent. The sheen can fade with wear, which is why guards and care matter.

Where we work

Find your city

Type your city or neighborhood to open the page for help near you. Tampa is home base and we serve all of Florida.

Start typing, for example a city name or a neighborhood.

    Ready for a floor that shines?

    Call or text Intelli-Clean in Tampa, or send the form, and we will set up a visit. Tell us about the building and the floor you have now.

    Visit

    Let's get your floor shining.

    Tell us about the building and the floor you have now. We read every message and reply with clear next steps and a time to walk the slab with you.

    • Your building: what it is used for, how big the floor is and what is on it now
    • Your city, the finish you have in mind, and any plan you saved from a tool on this site
    • A visit where we test the slab, polish a small patch and begin a plan around your hours
    Prefer to talk? Call or text(813) 516-3422

    Your estimate request

    Prefer to type? Text your request. We only use your details to respond to your request.