Epoxy Floor Designer
Pick a room, a floor system and a color or blend and see the epoxy floor go down with real reflections, then see the resin, flake and film it takes.

Colors and swirls are close examples. Real chips, metallics and lighting vary, so we put down a sample on your own slab before the job. Quantities use 1,604 square feet per gallon at one mil and ten percent extra.
Saved. Your choices will travel with the estimate form at the bottom of the page.
Three quick steps
- 1Choose a roomGarage, showroom, kitchen or warehouse.
- 2Pick a systemSolid, flake, metallic or quartz, and a color.
- 3Read the orderResin, chips and film thickness.
About the epoxy floor designer
Are the colors exact?
No. They are close examples. Real chips, metallic pigments and lighting vary, so we lay a sample on your own slab before the job.
How is the resin amount figured?
Each layer's film in mils times the floor area, divided by 1,604 square feet per gallon at one mil, plus ten percent extra for waste and the roller.
Why does metallic use more film?
A metallic system builds a base, a pigmented coat and a clear coat, each with a thick film, so it takes more resin than a simple solid color.
Services that go with this tool
Epoxy FlooringSelf-priming, high-gloss, chemical-resistant epoxy floors for businesses, warehouses and garages, in the color and finish you pick.See the service Epoxy
Flake Epoxy FloorsDecorative chip floors with a speckled, grippy surface that hides dirt and wear, popular in garages, shops, gyms and kitchens.See the service Epoxy
Metallic Epoxy FloorsSwirling, pearlescent metallic epoxy that looks like liquid marble or deep water, for showrooms, lobbies, bars and standout spaces.See the service Ready for a floor that shines?
Call or text Intelli-Clean in Tampa, or send the form, and we will set up a visit. Tell us about the building and the floor you have now.
















