Skip to content
Epoxy and Floor Coatings

Industrial Epoxy Flooring

Industrial floors take impacts, chemicals and heavy wheels all day. Thick, reinforced coating systems protect the slab, brighten the building and carry the lines and zones that keep people safe.

Industrial Epoxy Flooring by Intelli-Clean
  • WorkShot blast, repair, build and topcoat
  • BuildHigh-build, broadcast or mortar systems
  • ExtrasSafety lines and zone markings
  • ResultA protected, bright, marked floor
What you get

What is included

  1. 1Built for forklifts and wheelsHigh-build systems spread load and resist the point loads of loaded jacks and lifts.
  2. 2Chemical resistanceThe system is chosen for the acids, oils or solvents in your process.
  3. 3Safety markingsAisle lines, walkways and no-go zones are painted with clean edges and a lasting coating.
  4. 4Brighter, cleaner plantA light, glossy surface reflects light and shows spills so crews can see and clean them.
How it works

From your first call to the finished floor

We work out of Tampa and across Florida. Find your city below and set up a visit.

  1. 1You reach outCall, text or send the form with your building type, the floor size, the traffic and any chemicals, forklifts or moisture to plan for.
  2. 2We test the slabWe check moisture, profile and condition, and pick a coating system for the traffic, the chemicals and the look you want.
  3. 3We prepare and coatThe slab is ground to the right profile, cracks and joints are repaired and the coats go on in the right order, with time to cure between them.
  4. 4We cure and walk itThe floor is protected while it cures, then we walk it with you and explain when it can take foot, cart and vehicle traffic.
Good fit when

Is this the right choice for your building?

  • Plants, shops and fabrication floors
  • Warehouses and cold storage entrances
  • Loading docks and battery rooms
  • Maintenance bays and wash areas
Good to know

What makes a coating stay down

  • A tested, ground slabMoisture, profile and cleanliness decide whether a coating bonds, so we test and prepare first.
  • The right system for the trafficThickness, topcoat and texture are chosen for the carts, forklifts and chemicals on your floor.
  • Time to cureCoatings need their full cure before heavy traffic, and we give you the schedule.
Questions

Common questions

How thick should an industrial coating be?

It depends on the traffic and the exposure. A light-duty floor might get a thin coat while a forklift lane may need a high-build or mortar system. We recommend the thickness after we see the slab and the use.

Can we keep running during the work?

Usually in phases. We plan zones, cure times and detours with your plant manager so only part of the floor is out of use at a time.

Where we work

Find your city

Type your city or neighborhood to open the page for help near you. Tampa is home base and we serve all of Florida.

Start typing, for example a city name or a neighborhood.

    Ready for a floor that shines?

    Call or text Intelli-Clean in Tampa, or send the form, and we will set up a visit. Tell us about the building and the floor you have now.

    Visit

    Let's get your floor shining.

    Tell us about the building and the floor you have now. We read every message and reply with clear next steps and a time to walk the slab with you.

    • Your building: what it is used for, how big the floor is and what is on it now
    • Your city, the finish you have in mind, and any plan you saved from a tool on this site
    • A visit where we test the slab, polish a small patch and begin a plan around your hours
    Prefer to talk? Call or text(813) 516-3422

    Your estimate request

    Prefer to type? Text your request. We only use your details to respond to your request.