Coating Coverage Calculator
Enter the area, the film thicknesses and the extra for waste and see the gallons, the five-gallon pails and the chips or quartz to buy.

| Layer | Film | Gallons |
|---|
One gallon covers 1,604 square feet at one mil of dry film. Flake is figured at one quarter pound per square foot for partial and one half for full, quartz at three quarters, and boxes hold forty pounds. Always follow your product data sheet.
Saved. Your choices will travel with the estimate form at the bottom of the page.
Three quick steps
- 1Measure the floorSquare feet of slab.
- 2Set each layerPrimer, base and topcoat in mils.
- 3Read the amountsGallons, pails and chips.
About the coating coverage calculator
What is a mil?
A thousandth of an inch, the way the thickness of a dry coating is measured.
Why 1,604?
One US gallon is 231 cubic inches. Spread one mil thick it covers 1,604 square feet, so that is the basis for all coating math.
Why add extra?
Rollers soak up resin, edges take more and some always stays in the pail. A little extra keeps you from stopping halfway.
Services that go with this tool
Epoxy FlooringSelf-priming, high-gloss, chemical-resistant epoxy floors for businesses, warehouses and garages, in the color and finish you pick.See the service Epoxy
Polyaspartic Floor CoatingsFast-curing polyaspartic coatings that are UV stable, clear or colored and ready for traffic far sooner than a typical epoxy.See the service Epoxy
Garage Floor CoatingsTough epoxy and polyaspartic coatings for commercial garages, service bays, showrooms and homes, resistant to hot tires, oil and road salt.See the service Ready for a floor that shines?
Call or text Intelli-Clean in Tampa, or send the form, and we will set up a visit. Tell us about the building and the floor you have now.
