Skip to content
Glossary

Concrete Polishing Glossary

Grit, densifier, aggregate, mils, polyaspartic and more: the words floor pros use, explained in plain English. Search or scroll.

A close-up of metal-bond diamond segments on a grinding disc against raw concrete
Aggregate
The sand, stone and gravel in concrete. How deep a floor is ground decides how much of it shows.
Burnishing
Working a guard into a polished floor with a high-speed machine to bring up a clear, even shine.
Calcium chloride test
A test that measures how much water vapor leaves a slab over a day, in pounds per 1,000 square feet.
Control joint
A cut that gives a slab a planned place to crack, so it does not crack somewhere else.
Cream
The thin top layer of fine paste on a slab. A very light grind keeps it, so no stone shows.
Cure
The time a coating or concrete needs to harden fully before it takes traffic.
Densifier
A liquid that soaks into concrete and hardens it from within, cutting dust and wear.
Diamond tooling
Metal or resin pads with industrial diamonds that grind and polish concrete.
Dust extractor
A powerful vacuum with HEPA-grade filters that captures dust at the grinder.
Dye
A very fine pigment that soaks into polished concrete and gives bright, even color.
Epoxy
A two-part resin that cures into a hard, glossy, chemical-resistant coating.
Flake
Colored vinyl chips scattered into wet epoxy for a speckled, grippy floor.
Gloss unit
A reading from a gloss meter. A mirror floor reads above 80 at a sixty degree angle.
Grinding
Heavy cutting with coarse diamonds that levels a slab and strips what is on it.
Grit
A number for how coarse a diamond abrasive is. Low numbers cut, high numbers polish.
Guard
A stain-resistant treatment worked into a polished floor to keep spills on the surface.
Honing
The middle steps of a polish that give a smooth, satin look.
Metallic epoxy
Epoxy swirled with pearlescent pigments for a deep, marbled look.
Microtopping
A very thin, hand-troweled cement finish for floors, walls and counters.
Mil
A thousandth of an inch, the way coating thickness is measured.
Overlay
A thin cementitious layer placed over a slab to cover flaws or change the look.
Planetary grinder
A machine whose head carries several discs that spin as the head itself turns.
Polyaspartic
A fast-curing, UV-stable coating often used as a topcoat.
Salt and pepper
A polished finish that shows fine flecks of sand and stone.
Shot blasting
Throwing steel shot at a floor to clean it and give it the profile a coating needs.
Slip resistance
How well a floor grips a shoe, measured with a friction tester.
Spall
A chip or flake broken from the surface or edge of concrete.
Surface profile
How rough a prepared slab is, which decides whether a coating will grip.
Urethane cement
A thick, thermal-shock-resistant floor used in kitchens and food plants.
Vapor barrier
A coating that reduces water vapor moving up through a slab.
Wet polishing
Grinding and polishing with water, which holds dust down and cools the tooling.

Still have a question?

Describe what you see and we will explain it in plain English.

Visit

Let's get your floor shining.

Tell us about the building and the floor you have now. We read every message and reply with clear next steps and a time to walk the slab with you.

  • Your building: what it is used for, how big the floor is and what is on it now
  • Your city, the finish you have in mind, and any plan you saved from a tool on this site
  • A visit where we test the slab, polish a small patch and begin a plan around your hours
Prefer to talk? Call or text(813) 516-3422

Your estimate request

Prefer to type? Text your request. We only use your details to respond to your request.