Commercial concrete polishing, taken to mirror.
Polished concrete, epoxy flooring, polished overlays and staining for warehouses, stores, restaurants, dealerships, clinics and offices in Tampa and across Florida. Drag the grinder over the raw floor and watch each pass turn it to glass.
ReadyDrag the grinder across the raw floor
- Warehouses and plantshardened, dust-free floors that take forklifts
- Retail and showroomsmirror gloss that reflects the whole room
- Restaurants and hotelsseamless floors that clean up fast
- Clinics and officesdust-controlled work, phased around you
A floor that earns its keep
We test the slab, match the finish to the traffic, grind and harden it with real diamond tooling and walk the finished floor with you, so the shine lasts for years and the upkeep stays small. Based in Tampa, working across Florida.
- Slab first, finish secondWe test hardness, moisture, cracks and old coatings before any tool touches the floor, so the finish is built on facts.
- Real diamond toolingMetal and resin diamonds work up through the grit steps in the right order, with no shortcuts that leave scratches.
- Hardened from withinA densifier fills the pores, so the floor resists dust and wheel wear without a film that can peel.
- Dust under controlShrouded machines and HEPA-grade extractors keep the air clean in stores, clinics and offices around the work.
- Phased around youNights, weekends and zone-by-zone plans keep your doors open and your crew working.
- Walked with youWe check the finished floor with you in good light, explain how to care for it and fix anything that needs a second pass.
A floor for every kind of building
Warehouses, stores, restaurants, dealerships, clinics, offices, hotels and plants each get a finish matched to their traffic. Slide sideways to see them.
Warehouse and Distribution Center FloorsPolished floors for warehouses and distribution centers that stand up to forklifts and pallet jacks and keep the dust down.See the service Polish
Retail and Showroom FloorsPolished concrete that makes stores and showrooms look larger, brighter and more expensive, and keeps looking that way.See the service Polish
Restaurant and Food Service FloorsPolished and sealed floors for restaurants, bars, cafes and food areas, built to resist spills and easy to sanitize.See the service Polish
Auto Dealership FloorsMirror-polished showroom and service floors for auto dealerships, tough enough for tires and bright enough to reflect every car.See the service Polish
Healthcare Facility FloorsSeamless, dust-free polished concrete for clinics, dental offices, labs and care facilities that need a floor that is easy to clean.See the service Polish
Office and Lobby FloorsPolished concrete floors for offices, lobbies and corporate spaces that want a quiet, modern look with almost no upkeep.See the service Polish
Hotel and Hospitality FloorsPolished concrete for hotel lobbies, ballrooms, bars and back-of-house, with a high-end shine that survives luggage carts and events.See the service Polish
Manufacturing and Industrial FloorsHardened, sealed concrete floors for plants and shops that deal with oil, metal chips, wheel traffic and washdowns.See the service From a rough slab to a mirror in seven steps
Keep scrolling. The same showroom floor climbs from a coarse grind through densifying, honing and polishing to a glass finish, while a microscope shows the scratches getting finer and the gloss reading climbs.
30 to 70 Coarse grind
Metal-bond diamonds cut the slab flat and strip glue, paint and old coatings. The surface is rough and dull, and that is exactly right.
Concrete Grinding100 to 200 Refine
Transition diamonds remove the scratches left by the coarse step and start to even out the surface.
Concrete GrindingDensify Harden the slab
A densifier soaks in and reacts inside the concrete, filling pores and hardening the surface from within. This is what makes a polished floor tough.
Concrete Densifiers and Hardeners400 to 800 Hone
Resin diamonds smooth the surface to a satin sheen. Reflections appear, soft and fuzzy at first.
Concrete Polishing1500 Polish
A finer resin step brings up depth. Ceiling lights now show as clear shapes in the floor.
Concrete Polishing3000 Mirror
The finest step gives a glass-like gloss. Fixtures, windows and people reflect with sharp edges.
Retail and Showroom FloorsGuard Protect and burnish
A stain guard is applied and burnished in with a high-speed machine. The sheen is locked in and the floor sheds spills.
Concrete Sealers and Stain GuardsKeep scrolling to climb the grit ladder
Six diamond discs, every service
Pick a disc to open its group of services. Each one links to a page with the details.
Pick a disc to open its services
Polished Concrete Floors
Concrete polishing by property type: warehouses, retail, restaurants, dealerships, healthcare, offices, hotels and plants.
- Concrete Polishing01
- Warehouse and Distribution Center Floors02
- Retail and Showroom Floors03
- Restaurant and Food Service Floors04
- Auto Dealership Floors05
- Healthcare Facility Floors06
- Office and Lobby Floors07
- Hotel and Hospitality Floors08
- Manufacturing and Industrial Floors09
Epoxy and Floor Coatings
Epoxy flooring for commercial and industrial spaces: flake, metallic, polyaspartic, urethane cement, garages, drives and decks.
- Epoxy Flooring01
- Commercial Epoxy Flooring02
- Industrial Epoxy Flooring03
- Metallic Epoxy Floors04
- Flake Epoxy Floors05
- Garage Floor Coatings06
- Polyaspartic Floor Coatings07
- Urethane Cement Floors08
- Epoxy Driveway and Deck Coatings09
Overlays and Resurfacing
Polished overlays, microtopping, self-leveling, stamped, patio, driveway and terrazzo-style resurfacing.
- Polished Overlays01
- Microtopping Concrete Overlays02
- Self-Leveling Overlays03
- Stamped Concrete Overlays04
- Concrete Overlays for Patios05
- Concrete Overlays for Driveways06
- Terrazzo-Style Overlays07
Stain, Dye and Design
Concrete staining, dyeing, acid stain, saw-cut patterns, logos, countertops and aggregate finishes.
- Concrete Staining01
- Concrete Dyeing02
- Acid Staining03
- Decorative Saw Cuts and Scoring04
- Logos and Graphics in Concrete05
- Concrete Countertops06
- Aggregate Exposure Finishes07
Prep, Repair and Moisture
Grinding, shot blasting, coating removal, crack, joint and spall repair, moisture testing, leveling and densifiers.
- Concrete Grinding01
- Shot Blasting02
- Coating and Mastic Removal03
- Crack and Joint Repair04
- Spall and Patch Repair05
- Moisture Testing and Mitigation06
- Floor Leveling and Flattening07
- Concrete Densifiers and Hardeners08
Care, Restoration and Projects
Maintenance programs, re-polishing, sealers, slip resistance, dust-controlled work, homes, garages and phased projects.
- Floor Maintenance Programs01
- Repolishing and Floor Restoration02
- Concrete Sealers and Stain Guards03
- Slip Resistance Treatments04
- Dust-Controlled Grinding05
- Residential Polished Concrete06
- Garage and Basement Floors07
- After-Hours and Phased Projects08
How glossy do you want to go?
Slide from matte to mirror on a real room and watch the reflections sharpen. Then pick the sheen that fits your building.
Gloss units are a typical reading at a sixty degree angle. Ranges are approximate: matte about 5 to 15, satin 15 to 35, semi-gloss 35 to 60, high gloss 60 to 80 and mirror above 80.
Saved. Your choices will travel with the estimate form at the bottom of the page.
The same floor, raw and then mirror
Four buildings, each shown before and then after. Drag across the picture to polish it.








Drag anywhere on the picture, or use the arrow keys. It is the same spot both times.
Tools, dust control and a gloss meter
From the first grind to the final reading, every step is done with commercial equipment and checked.
1Grind
A ride-on planetary grinder levels the slab and strips what is on it, the foundation of every polish.
2Edges and details
Edge grinders reach along walls, columns and corners so the whole floor matches.
3Dust control
Machines run with shrouds and HEPA-grade extractors that capture the dust where it is made.
4Diamond tooling
Metal and resin diamonds work up through the grits, each step erasing the last one's scratches.
5Burnish and guard
A high-speed burnisher works the guard in and brings up the final shine.
6Measure the gloss
A gloss meter checks the finish, so you get a number and not just a look.
Tampa is home base, and Florida is the territory
Pick an area and the map flies there, or tap a pin. Each one opens that city’s page.
Pick an area and the map flies there, or tap a pin. Every pin is a city we serve: hover or tap one to open its page. Tampa is home base.
Design it, plan it and price it before you call
An epoxy floor designer, a polish planner, a sheen lab and calculators for coatings, moisture and care. No sign-up.
Straight from the floor
I was looking to have a 27 year old concrete floor in a massive distribution center cleaned and polished and all roads lead me to Tony, owner of Intelli-Clean. Intelli-Clean has the state of the art equipment to clean and polish any size concrete job. As I learned rather quickly, all concrete floors are not created equal. Tony's vast experience in dealing with all types of concrete proved invaluable in this project. The end result was a 27 year old floor that looked brand new with a shine that was truly amazing. My company refers to him as "The Floor Whisperer".
Great company. Tony does awesome work! We used him to mechanically harden our shop floor because we repair a lot of track equipment. He also helped to seal the floor so oil spills will not penetrate the concrete and can easily be cleaned. Highly recommend this company for all your flooring needs.

Since 1968, floors for businesses and the builders behind them.
Intelli-Clean Solutions, Inc. has served commercial clients and general contractors in Tampa and across Florida since 1968. Clients call Tony the Floor Whisperer. We look at the slab first, test before we promise, polish with real diamond tooling and leave the space clean, so you can see and trust the difference.
- Honest about the slabWe tell you what we find, what a floor can and cannot become and what it will take in time and care, before you decide.
- Samples before the floorA polished, dyed or coated test area on your own concrete shows the real result before the whole floor is done.
- Planned around your businessYour hours, your deliveries and your customers shape the schedule, not the other way around.
- Left cleanDust is captured, protection comes down and the space is handed back ready to use.
Plain-English guides on polish, epoxy and care
Short, useful reads on grit, sheen, moisture, coatings and keeping a floor shining.
Care and MaintenanceSlip Resistance on Polished and Coated FloorsA beautiful floor also has to be a safe one. Here is how traction is measured and improved on polished and coated floors.
Planning Your ProjectCan You Polish Concrete While Your Business Stays Open?Often yes. Here is how phasing, dust control and after-hours scheduling keep stores, clinics and offices running.
Concrete PolishingPolished Concrete for Warehouses and Distribution CentersWhy more distribution centers are choosing hardened, polished slabs over coatings, and what the process involves.Before you call
What do you do?
We polish concrete floors and install epoxy flooring, polished overlays and concrete stains for warehouses, stores, restaurants, dealerships, clinics, offices and other commercial buildings in Tampa and across Florida, and for homes too.
What is the grinder at the top of the page?
It is a small hands-on demo. Drag the grinder across the raw floor and each pass turns it from dull to mirror. The numbers for gloss, area and machine time are typical figures. A real job starts with a walk across your slab.
Can you polish the concrete I already have?
Most sound slabs can be polished. We test hardness, moisture and condition, polish a small area so you can see it and tell you plainly what will still show, such as cracks or patches.
How long does a polish take?
It depends on the size, the starting condition and the finish. The Polish Planner on this site shows the steps and the hours, and a site visit turns that into a schedule.
Can you work while my business stays open?
Often yes. We split the building into zones, control the dust with shrouded machines and extractors and schedule the loudest steps for nights and weekends.
Polished concrete or epoxy?
Polish is the slab itself, hardened and shined, with almost no upkeep. Epoxy is a coating that adds color and chemical resistance. Many buildings use both in different zones.
Do you serve all of Florida?
Yes. Our home base is Tampa and we serve cities from Pensacola to Miami. Use the map on this site or call to confirm your city.
How do I get started?
Call or text, or send the form, and set up a visit. Tell us about the building and the floor you have now.
Ready for a floor that shines?
Call or text Intelli-Clean in Tampa, or send the form, and we will set up a visit. Tell us about the building and the floor you have now.








